All Products

Fixed wing unmanned aerial vehicle

vertical take-off Vertical takeoff drones can be quickly deployed, practical and efficient, suitable for rapid response in emergency situations, precise hovering, and can take off and land on various complex sites. 100KM flight distance The...

Heavy duty agricultural industrial unmanned aerial vehicle

Powerful effects come from powerful configurations Aerosol nozzle, a micro electrostatic high-speed double disc atomizing nozzle with a spray width defined by a flight height of 50-100 microns and 6-8 meters (Optional pressure nozzle) Handheld...

Ultra Light Alert Drone Parachute with Recycle Bag

  Specification parameters   Emergency Landing: 5mls, 5.5m, 5.5m Speed reduction: 5.5m/s Flight: Equipped with compatible aircraft models, enter alert mode at an altitude of more than 6 meters above the ground, and only then will flight accidents be...

Ground Station Integrated Management System

Specification parameters   Ground station dimensions (length x width x height): 450mm x 350mm x 200mm Ground station weight: 7.5 kilograms Image display screen: equipped with a 15.6-inch high brightness LCD high-definition display screen, with multi...

Unmanned aerial vehicle catapult

Specification parameters   Installation method: quick disassembly and assembly, plug type structure without disassembly Throwing method: three-stage positioning Material: 7075 aviation aluminum Load capacity: 10KG Control principle: remote control...

Unmanned aerial vehicle automatic decoupler

Specification parameters  Specification 1. Automatic unhooking device for lifting 100 pounds Specification 2. Automatic unhooking device for lifting 300 pounds

DJI drone accessory special paddle clamp fixing clip

Series: DJI Series Product Model: T40 Paddle Clamp CW Applicable aircraft: T40/T50/T20P Material: Aluminum alloy material Installation hole position: 5MM Two axis hole spacing: 80mm Paddle clamp length: 110mm Weight (grams): 77.5 Standard screw...

Folding arm plant protection drone accessories

Flight control electronic tuning drone accessories

Main Control Unit (MCU): STM32F72RET6Gyroscope (IMU):ICM42688USB interface type: Type-cVideo Overlay (OSD): AT7456EInput voltage: 3-8SPL10(12-36V)Barometer: SPL06-001Black Box: Built in 1óM Flash MemoryBEC:9V/2A,5V/3ASupporting motors: M1-M8Serial...

Coaxial power motor carbon fiber propeller

Convenient to use and widely applicable Integrated power package, "fly as soon as you get it" It fills the power gap of multi rotor unmanned aerial vehicles with a takeoff weight of 100kg (quadcopter and eight propeller data) and is suitable for...

56 inch propeller model aircraft power kit

Hundred tests, stable performance To cope with the harsh and complex environment of plant protection operations, multiple testing projects are set up Multiple working conditions to ensure safe flight. High tensile strength, high efficiency, fast...

Dual antenna positioning and directional module

Product Introduction      The C-RTK 2HP product is a multi band high-precision positioning and orientation module for the entire satellite system. Adopting a new generation of high-performance GNSS SoC chips, a single chip completes baseband and RTK...

Image transmission transmitter receiver

Specification parameters Video input: 1 channel video input, HDMI/AHD input, choose 1 from 2 options Audio input: Supports 3.5mm headphone jack Audio output: Supports 3.5mm headphone jack Video encoding: H.265, 264 Main Profile Video resolution:...

Flight control module power module kit

Newly designed shock-absorbing materials Using newly developed special materials to replace traditional sponges with higher resonance frequencies IMU board Temperature compensation resistor ensures IMU accuracy. Redundant industrial grade IMU comes...

Drone multi rotor motor with folding propeller

Integrated modular design The E5 power system adopts an integrated modular design, which does not require secondary welding and is easy to install Can match 25mm diameter circular carbon fiber tube Overall IP56 protection level The E5 power system...

Tailored drones for firefighting tasks

Specification parameters   Multi rotor type: Six rotor unmanned aerial vehicle   Drone motor: electric brushless motor   Profit and loss institution: - Key quick profit and loss (downward folding)   Empty weight: 7Kg   Aircraft wheelbase size:...

Heavy duty transport drone

PRODUCT STRUCTURE DISPLAY     1、Carbon fiber folding paddle Convenient storage and energy consumption help extend flight time   2、Brushless Motor Special for drones, waterproof, dustproof, acid and alkali resistant, good heat...

Medium to large payload unmanned aerial vehicles

    Number of rotors: 6 rotors Body material: Carbon fiber composite material, ABS plastic, 7075 aluminum alloy Folding storage size: 1520mm x 640mm x 780mm Folding structure: One click quick folding (horizontal folding) Landing gear height: 500mm...